Logistics guide

Barcode labels: the right symbol, the right number and labels that scan first time

Barcode labels only earn their keep if every scanner in the chain reads them on the first pass, and most failures trace back to one of four choices: the wrong symbology, a number that isn't registered, a squeezed or badly coloured symbol, or a print method that can't hold the bars sharp. This guide works through each choice for retail packs, stock and inventory labels, and in-house printing, and ends with the questions to put to a label printer.

  • EAN-13, Code 128, GS1-128 and 2D codes compared
  • Why retail barcodes need GS1 numbers
  • The usual reasons scans fail, and the fixes
  • ICO registered ZA810991
  • UK company 11135452
  • Rules checked 19 November 2026
Free quotes

Get quotes for barcode labels

Free, no obligation. Three quick steps.

Your labels
The spec
Your details

ICO registered ZA810991 No obligation For businesses

Barcode labels: key points
  • Pick the symbology for the job: EAN-13 (or UPC-A) for products scanned at a retail till, Code 128 for your own stock, location and work-in-progress codes, and GS1-128 or a 2D code when trading partners want batch, date or serial data in a standard format.
  • A retail barcode is only as good as the number inside it. Retailers look the number up, so it needs to be a GTIN issued to your business; GS1 UK is the UK body that issues them. Internal Code 128 labels can use any numbering you design.
  • Leave the blank quiet zones either side of the bars untouched by artwork, die-cut edges, seams or other labels, and don't cut down the bar height to make the symbol fit.
  • Dark bars on a light background read best. Red, orange and other warm-coloured bars, metallic backgrounds and glossy laminates are common causes of no-reads.
  • A scanner reading a code once doesn't prove it's good. Verification grades print quality against an ISO/IEC standard, and some customers specify a minimum grade: ask for it in writing.

Which barcode type should your labels use?

Short answer

Match the symbology to whoever scans it. Retail tills expect EAN-13 (UPC-A in North America) carrying a GTIN. Your own warehouse can use Code 128 with any numbering. When a customer's system needs structured data such as batch or best-before date, use GS1-128 or a GS1 2D code, because the data is tagged in a way their system can parse.

Practical guide only; your retailer, wholesaler or customer's barcode specification overrides it
BarcodeWhat it carriesUse it forNumber needed
EAN-13 / UPC-AA product number (GTIN) only, digits onlyConsumer units scanned at a retail tillGS1-issued GTIN
ITF-14A GTIN for an outer caseCartons and outer cases moving to a retailer or distributorGS1-issued GTIN
Code 128Letters, digits and symbols of your choosingStock, bin and location labels, job tickets, internal trackingNone: your own scheme
GS1-128GS1 data in tagged fields (for example GTIN plus batch and date)Trade units where a customer wants batch, date or weight in the barcodeGS1-issued identifiers
QR code / Data MatrixLots of data in a small squareTiny parts, small packs, links, serial numbersYour own, or GS1 format if a partner asks
GS1-128 looks like Code 128 because it is Code 128, with a special start character and data in GS1's numbered fields (Application Identifiers), so the receiving system knows which digits are the product number and which the batch or date. Plain Code 128 with the same digits won't be parsed that way.

Do retail barcode labels need GS1 numbers?

Short answer

If the product will be scanned at a retailer's till or listed in a retailer's or wholesaler's system, expect to need a GTIN registered to your business. GS1 UK, the UK barcode standards body, issues them. Labels used only inside your own business don't need GS1 numbers.

The scanner reads a number; the till or warehouse system looks it up. A GOV.UK article on NHS supply-chain coding sums up the GTIN as "the number that uniquely identifies a product", usually seen as a barcode (GOV.UK). In healthcare the expectation is formal: GOV.UK guidance on selling to the NHS says the Department of Health and Social Care's eProcurement Strategy "mandates that all goods and services procured by an NHS acute trust must be compliant with GS1 and PEPPOL standards" (GOV.UK).

What are quiet zones, and how should a barcode sit on the pack?

Short answer

A quiet zone is the blank margin a scanner needs either side of the bars to find where the symbol starts and stops. Keep it clear of text, artwork, label edges and seams. On a tightly curved container, turn the barcode so the bars run around it (ladder orientation) so the ends of the symbol don't curve out of the scanner's view.

quiet zonequiet zoneKeep both margins clearPicket fenceLadder
Quiet zones either side of the bars (left). Bars upright on a bottle (picket fence) wrap away from the scanner at the edges; bars running around the bottle (ladder) stay flat along the scan line. Illustration only, not a real barcode.
Quiet zonesSet by the symbology's specification. Designers often crowd them with a border or text, and die-cut label edges can eat into them.
MagnificationRetail symbols can be scaled within limits set in the GS1 specifications; ask your designer or GS1 UK for the permitted range rather than shrinking to fit.
Bar heightCutting the bars short (truncating) makes a symbol harder to scan at an angle; some specifications don't allow it.
PlacementAway from seams, folds, crimps and anywhere a second label could overlap; on cases, a side face that can be scanned without unstacking.

Which colours work for barcode labels?

Short answer

Dark bars on a light, matt background. Black on white is the safest. Many scanners read with red light, so red, orange and other warm-coloured bars look much the same as the background and vanish. Avoid reversed-out (light bars on dark), metallic and see-through backgrounds.

Usually scans well

  • Black, dark blue or dark green bars
  • White or pale background
  • Matt finish over the symbol
  • Opaque white behind the barcode on clear or metallic labels

Common cause of no-reads

  • Red, orange, pink or pale bars
  • Light bars on a dark background
  • Foil or metallic material under the bars
  • Clear labels on dark products
  • Glossy laminate that glares

Should barcodes be pre-printed or printed in-house?

Short answer

Pre-print what never changes, print in-house what does. A fixed product GTIN can go on with the artwork. Batch codes, dates, weights, serial numbers and stock codes usually suit a thermal printer on site, either onto blank rolls or into a panel left on a pre-printed label.

Set-upBarcodes it suitsWhat to watch
Fully printed by a label printerA fixed EAN-13 per product, printed with the artworkThe printer may adjust bar widths for their press; ask that the barcode is checked on press, not just on the proof
Pre-printed, then over-printed in-houseFixed artwork, plus GS1-128 or a 2D code carrying batch and date added on the lineA clear, uncoated panel the right size for the barcode and its quiet zones, positioned where your print head prints
Blank rolls printed in-houseCode 128 stock, bin and asset codes; shipping and despatch labelsRoll spec and media matched to your printer, and a check scan at the start of each roll
Variable data printed by a label printerSequential or serialised codes from a data fileWho checks for duplicates and gaps, and how the run is verified

Ribbons and media are covered in our thermal transfer labels guide, and cores and wind in roll labels. One barcode-specific point: a thermal print head is a fixed row of heated dots. Bars running the same way the label travels are drawn by those fixed dots, so widths stay true; bars running across the label depend on dots heating and cooling as it moves, which can smear at speed. Print samples both ways and verify before fixing a layout.

Ready to price your labels?Send one brief and a specialist UK label printer will come back with a quote.
Get quotes

Can a barcode replace a printed batch code or date?

Short answer

Don't rely on it. The rules ask for information a person can read: food dates and lot numbers, cosmetic batch numbers, and for general products the product reference or batch. Put the barcode alongside the readable text, not instead of it.

Why won't my barcode labels scan?

Short answer

Most no-reads come from a handful of causes: poor contrast, a crowded quiet zone, bars printed too fat or too thin, a curved or creased surface, glare, faded or worn print, or a number the receiving system doesn't recognise. Work out whether the scanner can't read the symbol or reads it and rejects the number: the fixes are different.

SymptomLikely causeWhat to try
Scanner beeps, till says item not foundNumber not registered, not listed by the retailer, or a wrong check digitCheck the GTIN and its listing with the customer; reprint from the master data
Reads from one angle onlyCurved pack, truncated bars or a creased labelLadder orientation, full bar height, a flatter position
Never readsRed or pale bars, reversed print, metallic or clear backgroundBlack bars on a white panel
Reads intermittentlyQuiet zone crowded by text, a border or the label edgeClear the margins in the artwork
Fine on proof, poor on the rollBars spreading or thinning on press, or a glossy finishAsk for on-press verification and a matt finish over the barcode
White lines through every labelA failed dot on a thermal print headClean the head; replace it if the line stays
Faded after weeks in the warehouseDirect thermal labels exposed to heat or lightThermal transfer printing for long-life labels
A good scan on your own phone proves only that one device read it once. Customers' scanners, angles and lighting vary.

How is barcode print quality graded?

Short answer

A barcode verifier measures the printed symbol against an ISO/IEC print-quality standard (ISO/IEC 15416 for linear barcodes, ISO/IEC 15415 for 2D codes) and gives an overall grade, usually shown as a letter from A down to F. Some retailers and logistics customers set a minimum grade, so ask what they require and ask your label printer how they will prove it.

What should you tell a label printer about barcode labels?

Short answer

Which barcode, what data and where it comes from, who scans it and against what specification, whether it's static or variable, the material and finish, how the labels are applied or printed, and how quality will be checked.

  1. Name the symbologyEAN-13, ITF-14, Code 128, GS1-128 or a 2D code, plus any customer specification.
  2. Supply the dataGTINs as a list, or a data file for sequential or serial numbers; agree who checks it.
  3. Fix size and positionLabel size, barcode size and orientation, clear quiet zones, and any over-print panel.
  4. Choose material and finishMatt over the barcode; film or freezer adhesive if the label faces cold, wet or handling.
  5. Agree verificationAsk how barcodes are checked on the run, what grade they aim for, and for samples to test with your own scanners.

Get quotes for your barcode labels

Tell us about the labels once. We pass your brief to a specialist UK label printer suited to your job, who will:

  • Check the spec with you: size, material, adhesive, finish, roll or sheet, and how the labels will go on.
  • Quote in writing for your quantity, with any set-up, plate or proof costs shown.
  • Proof before printing, so you can check the artwork and the legal text.

For business orders. Prefer email? Write to [email protected] with your label size, quantity and what they're for.

Free quotes

Tell us about your labels

Three quick steps. Free and no obligation.

Your labels
The spec
Your details

ICO registered ZA810991 No obligation For businesses

Barcode labels: frequently asked questions

What is the difference between EAN-13 and Code 128?

EAN-13 holds a 13-digit product number (GTIN) and is what retail tills expect on consumer products. Code 128 can hold letters, numbers and symbols, so it suits internal stock, location and tracking labels where you set the numbering yourself.

What is GS1-128?

A form of Code 128 that writes data in GS1's numbered fields (Application Identifiers), so a receiving system can tell the product number from the batch, date or weight. Use it when a customer or distributor asks for that data in the barcode.

Do I need to buy barcodes from GS1 UK?

For products sold through retailers, usually yes: retailers look up the number, and GS1 UK issues GTINs in the UK. Check what your retailer or marketplace accepts. Barcodes used only inside your own business don't need GS1 numbers.

What colour should a barcode be?

Dark bars on a light background, ideally black on white. Red, orange and pale bars, reversed print and metallic or clear backgrounds are frequent causes of failed scans.

What is a quiet zone on a barcode?

The blank margin either side of the bars. Scanners need it to find the start and end of the symbol, so keep text, artwork, borders and label edges out of it.

Which way should a barcode go on a bottle?

On a tightly curved bottle or tube, rotate it so the bars run around the container (ladder orientation). Upright bars curve away from the scanner at the ends of the symbol.

Why does my barcode scan on my phone but not at the retailer?

One device reading it once doesn't mean the symbol meets the specification. Poor contrast, a crowded quiet zone or bar width errors can leave a code marginal. Ask for a verification report graded against the ISO/IEC standard.

Should barcode labels be pre-printed or printed in-house?

Pre-print barcodes that never change, such as a product's GTIN, with the artwork. Print changing data such as batch, date, weight or stock codes in-house on a thermal printer, onto blank rolls or a panel left on a pre-printed label.

Can a barcode replace the printed batch number or date?

Don't rely on it. UK rules ask for information people can read, such as food dates and lot numbers or a product's batch reference, so print the readable text as well as the barcode.

What are barcode labels on a roll used for?

Barcode labels on rolls feed thermal printers, dispensers and print-and-apply machines for stock, bin, shipping and product labels. Give the printer the core size, maximum roll diameter and wind your equipment needs.

Sources

We checked the facts on this page against these sources on 19 November 2026. Rules change: check the current version before you sign off a label.

  1. IT systems and coding (including GS1) (GOV.UK news)
  2. Partnering with the NHS to sell goods and services (GOV.UK)
  3. General Product Safety Regulations 2005, regulation 7: other obligations of producers (legislation.gov.uk)
  4. Food labelling: giving food information to consumers (GOV.UK, Defra and FSA)
  5. Regulation (EC) No 1223/2009 on cosmetic products, Article 19: labelling (legislation.gov.uk)