- Label stock is a sandwich: face material, adhesive, a silicone release coating and a liner. Printers buy it as one laminate, so the face, adhesive and liner are chosen together.
- Paper is the default for dry, indoor, short-life uses and is easy to print and write on. It tears, and most papers lose strength when wet.
- Synthetic labels (plastic films) resist water and tearing. Polypropylene is the general-purpose film; polyethylene is softer for squeezed packs; polyester is stiff and tough; vinyl wraps irregular shapes.
- Thermal papers carry a heat-sensitive coating, so they're chosen for the printer, not the product, and suit short-life jobs.
- Glassine paper liners are the everyday choice; thin, strong PET liners suit fast automatic applicators and clear labels that need a glass-smooth finish.
- Start from the surface and the conditions the label has to survive, then confirm with samples tested on your own pack. Rules on food, cosmetic and hazard labels require the information to stay legible and fixed, so durability is a compliance point too.
What are labels made of?
A self-adhesive label is a face stock (paper or film) printed with ink and sometimes protected by a varnish or laminate, with a pressure-sensitive adhesive underneath. It's supplied on a liner whose silicone coating lets the label peel away cleanly. Each layer affects how the label prints, sticks and lasts.
- Finish. Varnish or film laminate protects the print from rubbing, water and oils, and sets the look (gloss, matt, soft-touch).
- Ink. Has to suit the face: absorbent papers take ink differently from smooth films.
- Face stock. Decides strength, stiffness, water resistance and how the label behaves on a curve.
- Adhesive. Permanent, removable, freezer or high-tack: chosen for the surface and temperature.
- Release coating and liner. Hold the label flat until it's dispensed; the liner then becomes waste.
Because the layers are bought pre-laminated, a printer will often offer a face stock with a short list of adhesive and liner pairings. So it pays to describe the job (surface, conditions, application method) rather than ask for a material by name. Adhesives, finishes, clear labels and foil labels each have enough options to deserve their own guides; this page concentrates on the face and the liner.
What label paper types are there?
The main label paper types are uncoated, coated (semi-gloss or gloss), textured or speciality papers, and thermal papers for direct thermal or thermal transfer printing. Paper prints sharply and is easy to write on, but it tears and most papers weaken when wet.
| Paper | How it behaves | Good for |
|---|---|---|
| Uncoated (vellum) | Matt and absorbent. Takes pen, pencil and stamp ink; colours print softer; scuffs and marks more easily | Labels written on by hand, natural-look branding, office and file labels |
| Coated: semi-gloss or gloss | A clay coating gives a smoother surface for sharper text, finer detail and brighter colour; slightly better at shrugging off handling | Full-colour product labels on dry goods, cartons and jars |
| Textured and speciality papers | Felt-marked, laid or recycled-content papers with visible texture; fine text and barcodes need checking | Premium wine, spirits, gifts and candles |
| Wet-strength paper | Holds together better when soaked, though it can still wrinkle | Bottles that sit in ice or fridges, where a paper look is wanted |
| Direct thermal paper | A heat-sensitive coating turns dark under the print head. Heat, sunlight and some oils and plastics can darken or fade it; topcoated grades resist handling better | Parcel, shipping and short-life date labels |
| Thermal transfer paper | Coated so ribbon ink bonds to it; no heat-sensitive layer, so it doesn't darken in a warm van | Barcode, batch and warehouse labels printed in-house |
What are synthetic labels, and how do the films differ?
Synthetic labels use a plastic film as the face instead of paper, so they don't absorb water and are hard to tear. Polypropylene (PP) is the all-rounder, polyethylene (PE) is the softest and most squeezable, polyester (PET) the stiffest and most heat- and chemical-resistant, and vinyl the best at wrapping irregular shapes.
| Film | Squeeze and curves | Tear | Heat, UV and chemicals | Where it fits |
|---|---|---|---|---|
| Polypropylene (PP) | Fine on rigid curves such as glass and stiff bottles; can crease or lift on packs that are squeezed hard | Hard to tear | Good against water and many oils; outdoor life depends on the grade, ink and laminate | Most product labels: food, drinks, cosmetics, household. White, clear and metallised versions |
| Polyethylene (PE) | Softest: flexes with squeezable tubes and bottles without wrinkling | Stretches rather than tears | Good against water; softer surface marks more easily without a laminate | Squeeze tubes, soft bottles, shampoo and sauce packs, often matched to PE containers |
| Polyester (PET) | Stiff: suits flat or gently curved surfaces; tight curves can make it spring back | Very hard to tear, scratch-resistant and dimensionally stable | The usual pick for heat, solvents and harsh handling, with a resin ribbon if printed in-house | Asset tags, rating plates, electrical and equipment labels, laboratory and chemical labels |
| Vinyl (PVC) | Very conformable: wraps rivets, ribs and compound curves | Stretches; can be made to break up on removal for tamper evidence | Grades are made for outdoor exposure; plasticisers can migrate into some adhesives and inks | Outdoor, vehicle and equipment marking, signage-style labels and irregular shapes |
Glassine or PET liner: which backing should you choose?
Glassine is a dense, smooth, translucent paper liner and the everyday choice for roll labels applied by hand, dispenser or most applicators. PET (polyester film) liners are thinner and stronger, so they suit high-speed automatic application, very long rolls and clear labels that need a glass-smooth adhesive surface.
Glassine (paper) liner
- Translucent, so most label sensors can see the gap between labels
- Widely available with almost every face stock
- Can tear if nicked during die-cutting, which can mean a web break on a fast machine
- Paper waste after labelling; ask about liner recycling routes
PET (film) liner
- Thin and strong: fewer breaks at speed, and more labels in the same roll diameter
- Very flat and smooth, which helps clear labels look clear on the pack
- A clear label on a clear liner can be hard for some sensors to detect, so check with the applicator supplier
- Plastic waste after labelling; some schemes collect it
Sheet labels and some wide labels use kraft or clay-coated paper liners instead, which lie flat in office printers. For rolls, a thinner liner means more labels per roll at the same outside diameter: put the label and liner thickness into our labels per roll calculator to compare. Always tell the printer how the labels are applied; liner choice and wind direction matter most on roll labels fed into machines.
How do you choose the right label material?
Work from the outside in: what surface the label goes on, what it has to survive and for how long, how it's applied, and how it's printed. Those answers rule most materials out before you think about looks.
| Surface or condition | Face stocks to start with | Watch for |
|---|---|---|
| Dry cartons, bags, boxes | Uncoated or coated paper | Recycled board is dusty and fibrous: the adhesive matters more than the face |
| Glass, rigid plastic, tins | Coated paper or PP | Condensation and ice on chilled packs: move to film or wet-strength paper |
| Squeezable tubes and bottles | PE, or a conformable PP | Creasing and edge-lift after repeated squeezing |
| Small diameters and compound curves | PE or vinyl | Stiff films (PET) spring back from tight curves |
| Water, ice, bathrooms | PP, PE or PET, often laminated | Paper wicks water in at the edges |
| Oils, fragrance and fats | Film with a laminate or oil-resistant topcoat | Oils can soak into paper and soften some inks and adhesives |
| Outdoors and sunlight | PET or outdoor-grade vinyl or PP, with a UV-resistant finish | Colour fade and adhesive ageing: ask for an outdoor specification |
| Solvents, heat and abrasion | PET with a resin-ribbon or suitable printed finish | Test with the actual chemical, not a generic one |
| Short-life shipping and parcels | Direct thermal paper | Darkening near heat, in sunlight or in contact with some plastics |
- Describe the surfaceMaterial, shape, diameter and any taper or texture; send a sample container if you can.
- List the conditionsFridge, freezer, wet, oils, outdoors, chemicals, handling, and how long the label must last.
- Say how it's applied and printedBy hand, dispenser or applicator; in-house thermal printing; full print by the label printer.
- Test samplesApply at your packing temperature, leave them to settle, then put them through real conditions: soak, chill, squeeze, rub and scan.
Sector pages go deeper on specific conditions: bottle labels covers ice buckets and wet glass, cosmetic labels covers oils and squeeze tubes, and food labels covers chilled and frozen food.
Do any UK rules affect which label material you use?
No rule names a face stock, but several require the information on a label to last. Food information must be indelible, cosmetic details must be in indelible lettering, and CLP hazard labels must be firmly affixed and clearly and indelibly marked. Separately, HMRC treats a label as a packaging component for Plastic Packaging Tax.
- FoodInformation on prepacked food labels must be difficult to remove (indelible), and packaging must be suitable for food use (GOV.UK guidance, overview).
- CosmeticsContainer and packaging details must be in indelible, easily legible and visible lettering (Article 19). On a squeezed, oily tube that points to film and a protective finish.
- Hazardous chemicalsCLP labels must be firmly affixed to the packaging, and their elements clearly and indelibly marked (CLP Article 31).
- Plastic Packaging TaxHMRC lists bottles, caps and labels as packaging components manufactured separately, and says when labelling a pack that "the label may also be a packaging component which should be considered for the tax" (HMRC). Biodegradable and compostable polymers count as plastic, and a mixed-material component is plastic if plastic is the heaviest material by weight (HMRC).
Get quotes for your labels
Tell us about the labels once. We pass your brief to a specialist UK label printer suited to your job, who will:
- Check the spec with you: size, material, adhesive, finish, roll or sheet, and how the labels will go on.
- Quote in writing for your quantity, with any set-up, plate or proof costs shown.
- Proof before printing, so you can check the artwork and the legal text.
For business orders. Prefer email? Write to [email protected] with your label size, quantity and what they're for.
Related guides
Label materials: frequently asked questions
What are the main types of label materials?
Papers (uncoated, coated, textured, wet-strength and thermal papers) and plastic films (polypropylene, polyethylene, polyester and vinyl). Each comes with a choice of adhesive and liner, and the face can be printed, varnished or laminated.
What is label stock?
The unprinted laminate a label is made from: face material, adhesive, a silicone release coating and a liner. Label printers buy it on large rolls, print it, then die-cut and slit it into finished labels.
Should I choose paper or synthetic labels?
Paper for dry, indoor, short-life uses, or where people write on the label. Synthetic (film) labels where the label meets water, ice, oil, squeezing, outdoor conditions or chemicals, or needs to resist tearing.
What's the difference between polypropylene and polyethylene labels?
Polypropylene is the general-purpose film: clear, white or metallised, good with water and many oils, best on rigid or gently curved packs. Polyethylene is softer and flexes with squeezable tubes and bottles without wrinkling.
When should I use polyester labels?
When the label must be tough: equipment and asset labels, rating plates, and labels exposed to heat, solvents or abrasion. Polyester is stiff, so it suits flat or gently curved surfaces better than tight curves.
Are vinyl labels good for product packaging?
Vinyl is very conformable and comes in grades made for outdoor use, so it's used for equipment, vehicles and irregular shapes. For everyday product packaging, polypropylene or polyethylene usually does the job; ask the printer which suits your container.
Can you write on synthetic labels?
Not easily with an ordinary pen, because films don't absorb ink. Uncoated paper is easiest to write on; some films have a writable topcoat, so ask for samples to try with your pens.
What is a glassine liner?
A dense, smooth, translucent paper used as the backing for most roll labels. Label sensors can see through it to detect the gaps between labels, and it suits hand application, dispensers and many applicators.
Why would I choose a PET liner?
PET liners are thinner and stronger than paper, so they are less likely to break on high-speed applicators, fit more labels into the same roll size and keep clear labels looking smooth. Check your applicator's sensor can detect the labels on a clear liner.
Are thermal labels a separate material?
Yes. Direct thermal labels carry a heat-sensitive coating that darkens under the print head; thermal transfer labels are papers or films coated to accept ink from a ribbon. Pick them to suit your printer as well as the product.
Do plastic film labels count for Plastic Packaging Tax?
HMRC's guidance treats a label as a packaging component that may need to be considered for the tax, and counts biodegradable and compostable polymers as plastic. Ask your supplier how they treat their labels and take advice on your own position.
Sources
We checked the facts on this page against these sources on 19 November 2026. Rules change: check the current version before you sign off a label.
- Food labelling: giving food information to consumers (GOV.UK, Defra and FSA)
- Food labelling and packaging: overview (GOV.UK)
- Regulation (EC) No 1223/2009 on cosmetic products, Article 19: labelling (legislation.gov.uk)
- CLP Article 31: general rules for the application of labels (legislation.gov.uk)
- Check which packaging is subject to Plastic Packaging Tax (GOV.UK, HMRC)
- Definitions of finished components and substantial modifications for Plastic Packaging Tax (GOV.UK, HMRC)