Buying guide

Digital vs flexo label printing: plates, versions and break-even

Digital vs flexo label printing comes down to one trade-off: flexo carries one-off costs for plates and press set-up but can cost less per label as the run grows, while digital skips the plates and suits short runs, many versions and changing artwork. This guide explains how each press works, how to work out your own crossover point with a simple sum, and what colour, white ink and finishing choices change the answer.

  • How each process works, without the jargon
  • A fill-in-the-blanks break-even method
  • Spot colours, white ink, foils and varnishes
  • ICO registered ZA810991
  • UK company 11135452
  • Rules checked 19 November 2026
Free quotes

Get quotes: digital or flexo

Free, no obligation. Three quick steps.

Your labels
The spec
Your details

ICO registered ZA810991 No obligation For businesses

Digital vs flexo label printing: key points
  • Flexographic presses transfer ink from a relief plate, one plate per colour, so each new design or colour means new plates and set-up time. Digital presses image each label from the file, so changing the design costs little extra.
  • The crossover between the two depends on your own quotes: compare fixed costs (plates, cutter, make-ready) and the per-label price for each process at your real quantity.
  • Many designs or versions push the balance towards digital, because each flexo version usually needs at least one plate of its own.
  • Flexo prints spot colours from mixed inks matched to a reference; digital builds most colours from a set of process inks, so ask how close it can get to any brand colour that matters.
  • Clear and metallic labels often need an opaque white printed underneath; ask whether the press lays white and how many passes it takes.
  • Foils, embossing, spot varnish and lamination can be done inline on some presses and offline on others; it affects lead time and cost, so ask which applies.

How do digital and flexo label presses actually work?

Short answer

A flexo press uses flexible relief plates wrapped around cylinders: ink is metered onto the raised areas by an engraved roller and pressed onto the label stock, one print station per colour. A digital label press has no plates; it places toner or inkjet ink directly from the artwork file, so every label on the roll can differ.

Flexographic (flexo)

  • A plate is made for each colour in the design, from your approved artwork
  • Each colour runs through its own station, and stations can also apply varnish, white, cold foil or lamination
  • The press has to be set up and colours brought up to standard before the saleable run starts, which uses time and some material
  • Once running, it can produce long rolls of the same design quickly
  • Plates can be kept and reused for repeat orders if the artwork doesn't change

Digital (toner or inkjet)

  • Prints from the file, so there's no plate to make and little set-up waste between jobs
  • Colours are built from a fixed set of process inks, sometimes with extra colours or a white
  • Every label can carry different content: names, numbers, barcodes, flavours, languages
  • Changing artwork between orders is a file change, not new tooling
  • Embellishments may be added on the same line or on a separate finishing machine

Both processes print onto a roll of face material and adhesive on a liner; after printing, the labels are cut to shape, the waste matrix is stripped away, and the web is slit and rewound into finished rolls. That converting step is the same idea either way, which is why the cutter (die) question comes up whichever press you use.

What decides whether digital or flexo is cheaper for my labels?

Short answer

Fixed costs against running costs. Flexo front-loads cost into plates and make-ready, then each extra label adds little. Digital has small fixed costs but a per-label cost that stays much flatter as the quantity rises. Quantity, number of versions and number of colours move the balance.

General tendencies only: the printer's own equipment and pricing decide the real answer
FactorPushes towards digitalPushes towards flexo
Quantity per designSmall batches, trials, launches, seasonal linesLarge, steady runs of one design
Number of versionsMany flavours, scents, sizes or languagesOne design, or versions that share most plates
Artwork changesFrequent tweaks, legal updates, promotionsArtwork that stays fixed for many reorders
ColoursFull-colour images and gradients with no strict brand colourA few flat spot colours that must match a reference
Variable contentNumbering, personalisation, codes printed on every labelFixed content, with any variable data added later in-house
EmbellishmentWhere the printer can add it digitally or offline economicallyWhere foil, varnish or laminate can run inline in one pass
Cutters are a separate question. A custom shape needs a cutting die whichever process prints it, unless the printer already holds a die for your size or uses a cutting method that doesn't need one. Ask whether your size can run on an existing cutter.

How do I work out the break-even run length between digital and flexo?

Short answer

Ask for both processes on the same spec, split each quote into a one-off part and a per-label part, then divide the difference in one-off costs by the difference in per-label costs. Above that quantity flexo is cheaper; below it, digital is.

  1. Get matched quotesAsk for digital and flexo prices for identical size, material, adhesive, finish, roll spec and quantity, at two or three quantities.
  2. Split the costsFixed (F): plates, any new cutter, origination, make-ready. Per label (v): the cost that rises with quantity.
  3. Do the sumBreak-even quantity = (Fflexo − Fdigital) ÷ (vdigital − vflexo).
  4. Add the repeat effectIf plates are reused on reorders, Fflexo on the second order may be much lower. Re-run the sum for a year's orders, not just the first.

Worked example with made-up figures

Illustration only. These numbers are invented to show the method; they are not prices, and real figures vary widely by printer, spec and quantity
Assumed input (invented, not a price)DigitalFlexo
One-off costs per design (cost units)50600
Cost per label (cost units)0.050.02
Break-even quantity(600 − 50) ÷ (0.05 − 0.02) ≈ 18,300 labels

Now add versions. If the same order is split into four flavours and each flexo flavour needs one extra plate of its own, the flexo one-off cost rises while digital barely changes; in the made-up figures above, that alone can move the crossover a long way up. That is why a range of short-run labels with many variants so often ends up on a digital press, even when the total number of labels is large.

Not sure how many labels a year you use? Our labels per roll calculator turns rolls into label counts so your quantity is realistic.

Which process matches brand colours better?

Short answer

Flexo can print a spot colour from an ink mixed to a reference, which suits flat brand colours that must stay consistent. Digital simulates most colours from its process inks; many shades come close, but some bright, fluorescent or metallic colours can't be reached. Send your colour references and ask for a printed proof on the real material.

Ready to price your labels?Send one brief and a specialist UK label printer will come back with a quote.
Get quotes

Can digital labels have white ink, foil, varnish and embossing?

Short answer

Often yes, but it depends on the press and the finishing line. Some digital presses print an opaque white; others can't. Foil, spot varnish, embossing and lamination may run inline or on a separate machine. Flexo presses commonly add these at extra stations in the same pass.

Opaque whiteNeeded under colours on clear and metallic stock. Ask about opacity and whether it takes more than one pass.
FoilHot or cold foil; ask whether it's done inline or offline, and whether fine detail holds.
Varnish and laminateProtects print from rubbing, water and handling; a spot varnish or tactile effect may be a separate step.
EmbossingRaised areas need tooling of their own, which adds a one-off cost to either process.
Over-print panelsIf you'll add codes in-house later, keep varnish off that panel so your printer's ink takes.
Lead timeEvery offline step adds handling. Ask how finishes affect the delivery date the printer quotes.
Hybrid presses combine a digital print unit with flexo-style stations on one line, so a job can get digital artwork plus inline white, varnish, foil or die-cutting. If your design needs both short runs and heavy embellishment, ask whether the printer has this option.

What happens to plates and cutters on repeat orders?

Short answer

Flexo plates and cutting dies are usually kept by the printer for reorders, so a repeat of unchanged artwork may avoid the original one-off cost. Any artwork change usually means a new plate for each colour it touches. Agree storage, ownership and replacement terms in writing.

A reprint on a different process or press can look slightly different. If two batches will sit side by side on a shelf, ask for a proof against a previously printed label.

What should I ask a label printer before choosing digital or flexo?

Short answer

Give the real quantity per design, the number of versions and how often you reorder, then ask which process they'd use and why. Ask for the one-off and per-label parts of the price separately, so you can compare quotes and future reorders.

  1. Which process would you print this on, and why?A good answer refers to your quantities, versions and colours.
  2. What are the one-off costs?Plates, cutter, origination, proofs: and which ones recur if artwork changes.
  3. What's the price at a lower and higher quantity?Two or three price points show where your break-even sits.
  4. Can you hit our brand colours on this process?Ask for a proof on the real material.
  5. Is white, foil or varnish inline or offline?And how does that affect the delivery date?
  6. What happens on a reorder?Plate storage, artwork changes, colour consistency between batches.
  7. Will the rolls run on our equipment?Core, roll diameter and wind direction, as in our roll labels guide.

You don't need to know the answer before asking for a quote. Tell us your quantity, versions and reorder pattern in the form, and the printer can suggest the process that fits.

Get quotes for your labels

Tell us about the labels once. We pass your brief to a specialist UK label printer suited to your job, who will:

  • Check the spec with you: size, material, adhesive, finish, roll or sheet, and how the labels will go on.
  • Quote in writing for your quantity, with any set-up, plate or proof costs shown.
  • Proof before printing, so you can check the artwork and the legal text.

For business orders. Prefer email? Write to [email protected] with your label size, quantity and what they're for.

Free quotes

Tell us about your labels

Three quick steps. Free and no obligation.

Your labels
The spec
Your details

ICO registered ZA810991 No obligation For businesses

Digital vs flexo label printing: frequently asked questions

What is the main difference between digital and flexo label printing?

Flexo prints from a relief plate for each colour, so it has one-off plate and set-up costs but can be cheaper per label on long runs. Digital prints straight from the file with no plates, which suits short runs, many versions and changing artwork.

Is digital label printing cheaper than flexo?

For short runs and many versions it often is, because there are no plates. On long runs of one design, flexo can work out cheaper per label. The only reliable answer is to compare quotes for both processes on the same spec and quantity.

How do I find the break-even quantity between digital and flexo?

Split each quote into one-off costs and a per-label cost. Divide the difference in one-off costs by the difference in per-label costs. Above that quantity flexo is cheaper; below it, digital.

What counts as a short run of labels?

There's no fixed figure: it depends on the printer's presses and pricing. In practice, a run is short when the one-off flexo costs would be a large share of the total, which is where digital usually wins.

Do flexo plates have to be paid for again on a reorder?

Not usually if the artwork hasn't changed and the printer has kept the plates. A change to any colour in the artwork normally needs a new plate for that colour. Ask how long plates are stored and who owns them.

Can digital printing match a spot colour?

Often closely, but not always. Digital builds colours from process inks, so some bright, fluorescent or metallic shades are out of range. Give the printer your spot colour reference and ask for a proof on the real material.

Can digital presses print white ink?

Some can and some can't. White is often needed under colours on clear or metallic labels. Ask the printer whether their press lays white and how opaque it is.

Are foils and embossing available on digital labels?

Often, either on the same line or on a separate finishing machine. Embossing and some foils need tooling of their own. Ask whether finishes are inline or offline, as that can affect lead time.

What is a hybrid label press?

A line that combines a digital print unit with flexo-style stations, so a job can have digital artwork plus inline white, varnish, foil or die-cutting. It's useful when short runs also need embellishment.

Do I need a new cutter for digital labels?

A custom shape usually needs a cutting die on either process, unless the printer already holds one for your size or uses a cutting method that doesn't need one. Standard sizes may run on existing cutters.

Which is better for labels with variable data?

Digital can print different content on every label, such as numbering, names or barcodes. On flexo, variable data is usually added afterwards, for example on a thermal transfer printer in-house.

Sources

We checked the facts on this page against these sources on 19 November 2026. Rules change: check the current version before you sign off a label.

  1. Food labelling: giving food information to consumers (GOV.UK, Defra and FSA)
  2. CLP Annex I, section 1.2.1: hazard pictogram format and size (legislation.gov.uk)
  3. CLP Article 31: general rules for the application of labels (legislation.gov.uk)